CB/T465 is a flanged cast-iron marine gate valve shown in Taler's customer product catalogue. Its suitability depends on the approved medium, pressure-temperature limit, lining or coating and piping design.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T465 |
| Type | Flanged cast iron gate valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Cast iron body; exact grade and trim project-specific |
| Connection | Flanged ends; flange drilling and face-to-face project-specific |
| Media | Marine water, ballast or compatible low-to-moderate duty service; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Cast iron | Exact grade project-specific |
| Disc / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The the listed model indicates the CB/T465 family, cast-iron body and flanged gate-valve form. The product image shows a handwheel-operated body, but does not check the nominal size, pressure class, exact cast-iron grade, trim or dimensions.
Send the line drawing, old valve photograph, mating flange, medium and temperature. We check material suitability, gate arrangement and inspection scope before quotation.
Suitability depends on the exact body, coating or lining, trim, pressure-temperature limit and approved system design. Check the service before selection.
State CB/T465, nominal size, pressure class, flange drilling, face-to-face length, medium, temperature and required documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.