CB/T425 is listed as a low-pressure crude-oil filter in Taler's customer catalogue. Check the operating envelope, element configuration and connections from the fuel or oil-system drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T425 |
| Type | Low-pressure crude-oil filter |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Marine low-pressure crude-oil or fuel service; confirm actual fluid and conditions |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title identifies the CB/T425 low-pressure crude-oil filter family. The product image shows a red filter assembly with multiple bolted covers and a central operating lever; it depends on filtration grade, flow capacity, pressure range or element materials.
Provide the oil grade, viscosity and temperature, design flow, inlet pressure, required filtration grade, connection dimensions and maintenance arrangement. We check the filter configuration against the approved piping specification.
No. The source title gives only a broad service description. The operating and differential-pressure limits must be confirmed from the applicable standard drawing or product specification.
State CB/T425, oil properties, flow, inlet pressure, filtration grade, temperature, connections, cleaning method and required documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.