CB/T3942 Type A is a stainless-steel flanged marine globe valve shown in Taler's customer product catalogue. The Type A pattern, pressure class and trim must be matched to the approved piping specification.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T3942 |
| Type | Type A stainless steel flanged globe valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Stainless steel body; exact grade and trim project-specific |
| Connection | Flanged ends; flange drilling and face-to-face project-specific |
| Media | Marine water, chemical-compatible or other approved fluid service; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title confirms the CB/T3942 Type A family, stainless-steel construction and flanged globe-valve form. The product image shows a rising-stem body, but depends on the nominal size, pressure class, exact stainless grade or face-to-face dimension.
Provide the old valve photograph or drawing, mating flange, medium and temperature. We verify the Type A pattern, trim and inspection scope before quotation.
Not from appearance alone. Material compatibility, pressure class, flange dimensions, trim and service temperature must all match the approved design.
State CB/T3942 Type A, nominal size, pressure class, flange drilling, face-to-face length, medium, temperature and required documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.