CB/T3594 Type A is identified by the customer catalogue as a cap-type marine air pipe head. Check the tank service, nominal size and deck interface against the vessel drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T3594 |
| Type | Type A cap-type air pipe head |
| Nominal size | Project-specific |
| Pressure | Not a pressure-retaining valve; tank vent duty project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Marine tank air venting; tank medium to be specified |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The cap-type head forms the exposed termination of a tank air pipe. The source photograph confirms the product family and visible cap arrangement, but depends on internal screen, weather protection, dimensions or material grade.
State the tank medium, air-pipe nominal size, deck thickness, required height, connection, coating and inspection documents. Check the complete arrangement against the applicable standard edition and approved vessel drawing.
Not automatically. The termination geometry and protection arrangement differ; verify the installed type and vessel drawing.
State CB/T3594 Type A, tank medium, nominal size, deck interface, material, finish and required documents.
Yes. Send the pipe size, deck drawing, fixing details and an old product photograph. The connection, height and cover arrangement must be checked before supply.
State the tank medium, venting duty, pipe size, deck location and any fire, weather or class requirement. Unconfirmed details are agreed against the project requirements.