CB/T3591 is a flanged gate valve for oil-tanker service shown in Taler's customer product catalogue. The final material, pressure class and cargo-line connection must be matched to the vessel drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T3591 |
| Type | Flanged oil-tanker gate valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Flanged ends; flange drilling and face-to-face project-specific |
| Media | Oil-tanker cargo or service lines; exact medium and temperature project-specific |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title confirms the CB/T3591 standard family, flanged gate-valve form and oil-tanker application. The product image shows a handwheel-operated rising-stem body, but it depends on the nominal size, material, pressure class or face-to-face length.
For replacement or newbuilding supply, send the cargo-line drawing, old valve photograph, medium, temperature and required fire or class documents. We check the gate pattern before quotation.
No. Cargo compatibility depends on the exact material, seal, temperature, pressure and approved tanker design. Check the medium before selection.
It is normally selected for full-open or full-closed isolation. Use the approved control-valve pattern when flow regulation is required.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.