CB/T3572 is listed as a marine gas-water separator. Check the process medium, flow, pressure, connection sizes and vent/drain arrangement against the system drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T3572 |
| Type | Marine gas-water separator; internal arrangement project-specific |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Gas-water service; process fluid and operating conditions to be specified |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
A separator's performance depends on the internal construction and operating envelope, neither of which can be established from the product image alone. The catalogue identifies the standard family and general gas-water separation duty.
For selection, specify fluid composition, gas and liquid flow rates, operating pressure and temperature, inlet/outlet orientation, drain and vent requirements, materials and required test documents. Confirm dimensions and capacity against the project requirements.
No. Flow rates, operating conditions and the separator configuration are needed to confirm capacity.
Provide medium, gas and liquid flow, pressure, temperature, connection sizes, orientation, materials and documentation requirements.
State the medium, pressure, temperature, observation or control function, connection, material, signal output and required scale or range.
Only after connection, range, pressure rating, material and signal requirements are matched against the existing device.