CB/T3477-92 Type A is a closed vertical anti-wave valve shown in Taler's customer product catalogue. Its vertical installation, body type and closure arrangement must be matched to the approved storm or scupper drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T3477-92 |
| Type | Type A closed vertical anti-wave valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Marine drainage, scupper or discharge service; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title confirms the CB/T3477-92 Type A family and closed vertical anti-wave duty. The product image shows a compact vertical body with a handwheel and flanged connections, but depends on the nominal size, pressure class or internal closure details.
Send the deck or shell drawing, flow direction, old valve photograph and mating flange dimensions. We check the Type A arrangement and installation clearance before quotation.
Not without checking the installation orientation, flow direction, flange pattern and project requirements. Vertical and horizontal arrangements are not interchangeable by appearance.
State CB/T3477-92 Type A, nominal size, pressure class, installation orientation, connection, medium and required documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.