CB/T3475 Type B is a cast steel marine anti-wave valve shown in Taler's customer product catalogue. The Type B body and installation arrangement must be matched to the approved piping or shell drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T3475 |
| Type | Type B cast steel anti-wave valve |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Cast steel body; exact grade and trim project-specific |
| Connection | Project-specific |
| Media | Marine discharge and compatible water service; exact duty project-specific |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Cast steel | Exact grade project-specific |
| Disc / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title identifies the CB/T3475 Type B family and cast-steel construction. The product image shows a compact flanged body with a closure cover, but it depends on the nominal size, pressure class, internal trim or exact mounting detail.
For replacement supply, send the old valve photograph, mating flange or hull connection, flow direction and service medium. We check the anti-wave arrangement and inspection scope before quotation.
Do not treat it as a generic check valve. The source identifies an anti-wave marine pattern; match the type, flow duty and installation drawing before substitution.
State CB/T3475 Type B, nominal size, pressure class, connection, medium, temperature, installation position and required inspection documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.