• CBM1134 Duplex Oil Strainer — Bronze, Change-Over Type,TAILCN Marine Valves,CBM1134 Duplex Oil Strainer — Bronze, Change-Over Type

CBM1134 Duplex Oil Strainer — Bronze, Change-Over Type

No.CBM1134
Duplex, change-over to CBM1134, ZCuSn10Zn2 cast tin bronze, DN20-DN80, 0.5 MPa, Made in Wenzhou, China.
  • CBM1134 Duplex Oil Strainer — Bronze, Change-Over Type,TAILCN Marine Valves,CBM1134 Duplex Oil Strainer — Bronze, Change-Over Type

Description

CBM1134 · Marine strainer

CBM1134 is the bronze duplex oil strainer: two filter baskets in one body with a change-over cock, so one side can be cleaned while the other keeps the line running.

01 · Product details

Product details

Key information for selection. Send your drawing or nameplate photo for an exact match.

ItemValue
StandardCBM1134
TypeDuplex, change-over
Nominal sizeDN20–DN80
Pressure0.5 MPa
Body materialZCuSn10Zn2 cast tin bronze
ConnectionFlanged, both ends
MediaFuel oil · lube oil · hydraulic oil
Inspection & certificatesCCS · LR · BV · ABS · DNV · ZC

Materials of main parts

PartMaterialTrademark
Body, coverCast tin bronzeZCuSn10Zn2
Basket frameTin bronzeZCuSn10Zn2
MeshStainless steel1Cr18Ni9Ti
Change-over cockTin bronzeZCuSn10Zn2
02 · Overview

Product overview

Each basket carries a stainless wire mesh; the mesh size is chosen from the oil system requirement, typically 60 to 200 mesh for fuel and lube oil.

The change-over cock is a single lever with a marked position for each side and a closed centre, so the flow is never routed through both baskets at once.

CARGO SHIPTANKERTUGFISHING VESSELNAVAL AUXILIARYOFFSHORE SUPPLY
03 · Buyer information

Frequently asked questions

What mesh should I specify?

Tell us the oil system and the particle size the filter must catch. Fuel oil filters are usually 60–100 mesh, lube oil 100–200 mesh; we fit the mesh you nominate.

Can the strainer be cleaned without stopping the engine?

Yes — that is the point of the duplex body. Turn the cock to the standby side, open the cover and lift the basket out.

Can it be supplied with a classification society certificate?

Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.

Can it replace a part built to another standard?

Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.

What do you need from me to quote?

Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.