CBM1113 is listed as a marine fire connector cover. Check the mating connector, nominal size, sealing arrangement and fire-main requirements before ordering.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CBM1113 |
| Type | Fire connector cover with chain; mating connector project-specific |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Marine fire-main and shore-connection protection |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The product image shows a metal circular cover with a retaining chain and central fastening arrangement. The image confirms the cover family but depends on the connector size, pressure rating, material grade or sealing specification.
Provide the fire connector drawing, hose or shore-coupling interface, nominal size, fire-main pressure, material requirement and required inspection documents. The cover must be matched to the installed connector, not selected by outside diameter alone.
No. The chain, sealing face, fastening and nominal size must match the installed connector.
Provide the mating connector standard, size, pressure, cover material, seal requirement and required documents.
State the hydrant or hose-valve standard, inlet flange, outlet coupling, nominal size, pressure class, medium and required inspection documents.
Only after the approved fire-main drawing and coupling standard are checked. Do not assume that two visually similar outlets are interchangeable.