CBM1071 and CBM1077 Type B are flanged bronze swing check valves — one disc on a hinge, closing on reverse flow with no stem and no gland. Used on pump discharges and header branches where a non-return function is needed but not throttling.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CBM1071 · CBM1077 |
| Type | B · swing check |
| Nominal size | DN15–DN150 |
| Pressure | 0.2 MPa |
| Body material | ZCuSn10Zn2 cast tin bronze |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast tin bronze | ZCuSn10Zn2 |
| Disc | Cast tin bronze, renewable | ZCuSn10Zn2 |
| Stem | Tin brass, rolled thread | HSn62-1 |
| Seat | Integral bronze seat | ZCuSn10Zn2 |
| Packing | PTFE impregnated asbestos-free | — |
A swing check gives the lowest pressure drop of the non-return family because the disc lifts clear of the flow. On a pump discharge it also damps the surge that a lift check would pass straight through to the line.
There is no packing gland, so there is nothing to tighten and nothing to leak at the bonnet — the only joint is the cover gasket. Type B is the flanged pattern; the valve can be mounted horizontal or vertical with upward flow.
Yes, for upward flow. On downward flow it will chatter — use a lift check or a spring-loaded pattern instead.
Leave at least five diameters of straight pipe upstream so the disc is not held open by turbulence, which is the usual cause of a check valve that hammers.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.