Four CBM standards, one bronze body family: CBM1069 and CBM1075 are the globe valves, CBM1070 and CBM1076 the globe-check (stop-check) versions that also stop reverse flow. Type A, flanged both ends, for sea water, fresh water and oil lines on board.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CBM1069-81 · CBM1070-81 · CBM1075-81 · CBM1076-81 |
| Type | A · globe and globe-check |
| Nominal size | DN15–DN150 |
| Pressure | 0.2 MPa |
| Body material | ZCuSn10Zn2 cast tin bronze |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil · lube oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast tin bronze | ZCuSn10Zn2 |
| Disc | Cast tin bronze, renewable | ZCuSn10Zn2 |
| Stem | Tin brass, rolled thread | HSn62-1 |
| Seat | Integral bronze seat | ZCuSn10Zn2 |
| Packing | PTFE impregnated asbestos-free | — |
The globe-check pair matters where a line needs both throttling and a non-return function in one body: the handwheel shuts the valve, and with the handwheel open the disc still closes against backflow. That saves a separate check valve and two flanges in a tight engine room.
All four standards share the same bonnet thread, stem and disc, so a ship can carry one spare set for the whole range. Bodies are cast in ZCuSn10Zn2 — no coating, no corrosion allowance to monitor on the seawater side.
1069 and 1075 are shut-off globe valves, 1070 and 1076 are the globe-check versions; the difference between the 1069/1070 pair and the 1075/1076 pair is the flange and face-to-face range. Tell us the pipe size and the drawing number and we match the right one.
Yes. The bonnet comes off with the valve in the line and the disc and seat ring are renewable — the usual reason these bronze valves stay in service for decades.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.