CB495 Type A is listed in the customer catalogue as a marine suction port. Check the suction opening, mounting dimensions, pipe connection and service duty against the vessel drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB495 |
| Type | Type A marine suction port |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Marine sea water, ballast or drainage service; confirm actual medium |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The product image shows a flanged suction fitting with an internal protective grille. It confirms the Type A product family and general physical form, but depends on the nominal size, flow capacity, material grade or connection dimensions.
Provide the shell or tank drawing, suction duty, medium, line size, flange or weld interface, deck or shell thickness and required inspection documents. The final flow path and mounting arrangement must follow the project requirements.
No. Capacity depends on the opening, grille area, pipe system and operating duty; it must be confirmed from the drawing and system data.
State CB495 Type A, installation location, medium, line size, mounting interface, expected flow and required documents.
Provide the shell or deck location, opening size, flange or weld detail, drainage duty, material and the existing fitting photograph or drawing.
No. Their installation location, flow direction, grating or rose-box pattern and connection must match the ship's drawing.