CB3477-92 Type A is the closable version of the vertical storm valve: a handwheel and screw let the crew lock the disc shut, so the discharge can be isolated for docking, tank cleaning or a flooded compartment.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB3477-92 |
| Type | A |
| Nominal size | DN50–DN150 |
| Pressure | 0.1 MPa |
| Body material | ZG230-450 cast steel / ZCuSn10Zn2 bronze |
| Connection | Flanged, both ends |
| Media | Sea water · bilge · sewage |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast tin bronze | ZCuSn10Zn2 |
| Disc | Cast tin bronze | ZCuSn10Zn2 |
| Stem | Tin brass | HSn62-1 |
| Packing | PTFE / graphite | — |
A plain storm valve cannot be closed from inside the ship. Where the classification society requires the discharge to be isolatable — or where the line must be blanked for repair — the closable pattern is specified instead.
The locking screw acts on the disc spindle only; it does not replace a sea valve. On most ships the two are fitted in series: sea valve at the shell, closable storm valve inboard.
Because the sea valve sits at the shell and may be inaccessible, or because the two together give the surveyor a means of isolating the line from inside the compartment.
No. It is normally left open so the valve works as a non-return valve, and only screwed down when the line must be isolated.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.