CB304-92 (re-issued as CB/T3843-1999) Type B is the bronze scupper valve fitted to deck drains and freeing ports. A bronze flap closes against a bronze seat, so the valve can stay wet for years without a coating.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB304-92 · CB/T3843-1999 |
| Type | B |
| Nominal size | DN50–DN150 |
| Pressure | 0.1 MPa |
| Body material | ZCuSn10Zn2 cast tin bronze |
| Connection | Flanged, both ends |
| Media | Deck water · sea water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast tin bronze | ZCuSn10Zn2 |
| Disc | Cast tin bronze | ZCuSn10Zn2 |
| Stem | Tin brass | HSn62-1 |
| Packing | PTFE / graphite | — |
The whole valve is bronze — body, flap and seat — which is why it is used on open decks where paint fails within a season. There is no ferrous part in contact with the discharge.
Type B differs from Type A in flange pattern and body depth; the two are not interchangeable on an existing weld-in pocket, so send the pocket drawing when ordering.
It sits in standing water and spray. A coated cast iron body will fail at the coating first; a bronze body has no coating to fail.
CB/T3843-1999 superseded CB304-92 with editorial changes; the flange and body dimensions are compatible, and we mark the body with the standard you specify.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.