CB3022-1994 is the bronze air signal safety valve: it relieves compressed air and sounds an audible signal as it lifts, so a pressure fault in a control air or starting air line is noticed without an alarm circuit.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB3022-1994 |
| Type | Air signal, male thread |
| Nominal size | DN15–DN32 |
| Pressure | 0.5 MPa |
| Body material | ZCuSn10Zn2 cast tin bronze |
| Connection | Flanged, both ends |
| Media | Compressed air · control air |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast tin bronze | ZCuSn10Zn2 |
| Disc | Cast tin bronze | ZCuSn10Zn2 |
| Stem | Tin brass | HSn62-1 |
| Packing | PTFE / graphite | — |
The signal disc vibrates as air passes, producing a whistle that carries through a machinery space. It is a purely mechanical warning — no power supply, no sensor to fail.
Used on starting air receivers, control air manifolds and pneumatic instrument lines where a silent relief valve would let a fault go unnoticed.
It is an air whistle, audible across a normal machinery space; it is a warning device, not a measured alarm, so it is not a substitute for a pressure switch on an unmanned space.
No. It is built for air service only — bronze body and brass trim are not cleaned for oxygen.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.