CB/T3476-92 covers the vertical pattern storm valve: inlet flange horizontal, outlet straight up through a deck or a vertical shell plate. Used where the discharge leaves the hull upward rather than through the side.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | CB/T3476-92 |
| Type | Vertical, outlet up |
| Nominal size | DN50–DN150 |
| Pressure | 0.1 MPa |
| Body material | ZG230-450 cast steel / ZCuSn10Zn2 bronze |
| Connection | Flanged, both ends |
| Media | Sea water · bilge water · sewage |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast tin bronze | ZCuSn10Zn2 |
| Disc | Cast tin bronze | ZCuSn10Zn2 |
| Stem | Tin brass | HSn62-1 |
| Packing | PTFE / graphite | — |
The vertical body keeps the disc seat horizontal, so the disc closes by its own weight as soon as flow stops. That makes it the preferred pattern for scuppers and deck drains that discharge through the deck above the waterline.
Because the body is a single casting with no bonnet joint below the waterline, there is no gasket face exposed to sea water — a common leak path on fabricated alternatives.
When the pipe leaves through a deck or a vertical plate. An angle body (CB/T3475) turns the flow 90°, a vertical body does not — fitting the wrong one forces an extra bend into the line.
Yes, both ends are the same DN unless you specify a reducer; give us the outlet size and we cast the body to suit.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.