Categories
Categories

Bronze, cast iron or stainless: choosing a body material for sea water

Sea water is the hardest common medium on a ship. A short guide to what each body material can and cannot take.
Oct 22nd,2026 3 Views

Three materials cover most marine valve bodies, and the choice is usually made by the " medium, the pressure and the maintenance interval — not by price alone.

Bronze

The traditional choice for sea water up to modest pressures. Good resistance in quiet " sea water, repairable, and tolerant of the small galvanic couplings you find in a machinery " space. It is not the right answer for high flow velocities, where erosion-corrosion " becomes the limiting factor.

Cast iron and ductile iron

Cost-effective for larger bores and lower pressures: ballast, bilge, general service. " Internal and external coatings do most of the work here, so coating quality and surface " preparation matter as much as the base metal. Ductile iron buys you mechanical toughness " where cast iron would crack under shock loading.

Stainless steel

Needed where chlorides are combined with velocity, or where hygiene and cleanability " rule out iron. Grade selection matters: the common 304 is not a sea water material, and " even 316 benefits from being specified with the actual chloride level and temperature in " mind rather than as a default.

The practical rule

Send us the medium, the design pressure and temperature, the line size and the class " society requirement. We will quote two options — the one that meets the spec and the " one that will last longest — and tell you where the difference shows up in service.